全站搜索 - Telink 开发者社区
全站搜索
社区首页 »- 正文命中20
-
帖子
蓝牙收发例程 客户使用的是telink_zigbee_ble_concurrent_sdk,现转移到Zigbee板块
-
帖子
telink_b91_mesh_audio_sdk-v1.0.3 BT/BLE可以看这个文档
-
帖子
低功耗模式下,Sram是否掉电? …mi.cn/doc/an/AN-22063001-C_Telink%20BLE%20Multiple%20Connection%20SDK%20Developer%20Handbook.pdf[/url] 4.2.8 API blc_pm_…
-
帖子
Zigbee SDK 3.7.1.2 reporting issue …eporting configuration */ u8 reportableChange = 0x00; bdb_defaultReportingCfg(SAMPLE_LIGHT_ENDPOINT, HA_PROFILE_ID, ZCL_…
-
帖子
蓝牙双模芯片推荐 请问你们有蓝牙双模芯片推荐的,即同时支持蓝牙BLE和2.4G通讯 我这边需要做一款产品,两个设备通过2.4G互相通讯,然后由其中一台设备通过蓝牙连接手机通讯,是否TLSR8258能够实现功能,如果不能,能否推荐适合的一款?
-
帖子
【提问】关于TLSR8258 OTA 芯片型号:TLSR8258 SDK:telink_b85m_ble_single_connection_sdk-V3.4.2.4_Patch_0003 【问题描述】基于sdk的b85m_ble_sample例程,使用串口根据自有协议对芯片进…
-
帖子
Contact_sensor例程入网后,重新上电,不会rejoin …s will be different. Because the problem I had was on the router device, when I read the flash where IEEE address is sto…
-
帖子
How to check that sampleLight is commissioned ? After successfully join the network, you can press the button SW2 to allow or disable the permit join state.
-
帖子
基于B91谈下对音频的理解 …IZE); audio_set_mute_pga(0); ////enable audio need follow this step: 1 enable bias; 2 disable mute_pga; audio_amic_init(…
-
帖子
使用flash_write_page无法保存数据 …)读出来, 但重启蓝牙读出就的数值就变为FF了,就是被刷新了,为什么?(ble固件是不会被刷新的,重启仍是Flash_write_Buf的数据) 是不是mesh固件有什么宏要开启才能使用flash保存?…
-
帖子
请问mesh的flash用户空间也是0x40000吗? 你好,我想使用flash_read_page(0x040000,来进行数据存储,请问用户可使用的Flash空间跟ble一样都是0x40000开始吗?
-
帖子
你好,Mesh例程里起串口中断会导致蓝牙无法被扫描 …m_uart查看串口收到的数据。不需要使用dma_chn_irq_enable HCI_ACCESS 选择 HCI_USE_UART 后, 在 uart_drv_init() 里面会调用 dma_chn_irq_enable(FLD_DMA…
-
帖子
8258在低功耗唤醒模式后能不能做为代理被手机连接 …用bls_pm_setSuspendMask (SUSPEND_DISABLE);app_enable_scan_all_device ();关闭ble协议栈的PM并开启 ...[/quote] 好的,我试试,谢谢…
-
帖子
3 endpoints …point is not registered. What is problems ?…
-
帖子
will this TLSR8258DK48 board support mesh 1.1? TC BLE mesh-4.1.0.1 SDK already has mesh 1.1, but some features are turned off by default. You can refer to Chapter 21-2…
-
帖子
Sometimes zb_factoryReset(); is not worked. …Handler() is not worked. What is problem ?…
-
帖子
how to get the Rssi? … is a way to obtain the global variable value through the SWM signal line(SWM is the debugging interface for Telink chip…
-
帖子
What time is until sampleLight (over 40pcs) connect to coordinator ? … find the issue ? Do you have no problems?…
-
帖子
zigbee 低功耗 请问开启PM_ENABLE宏后为什么无法正常进入低功耗,检查后发现zb_isTaskDone中一直有任务在运行,如下所示;如何查看当前正常运行的任务?
-
帖子
关于SDK中的蓝牙中断 …iver/doc/kite/html/md__project_1__table_of__content_03__t_s_i__core__features.html]https://wiki.telink-semi.cn/tools_and…
